|
Eaves
Mounts |
|
L-1 | Angle Eave Mount - For QPA-1-158 |
Professional Heavy Duty
Eave Mount Bracket is designed to lag bolt to the fascia
of the eave. Installers can mount the bracket across the
gable of the roof, or at any other angle of the Eave
Fascia. Lag bolts are suggested to secure bracket to
fascia. (Lag bolts not included) This Eave Mount bracket
mounts in minutes, installers save time by not having to
mount on the roof. No holes drilled in the roof.
MSRP
$9.95 -
Link
to Brochure |
 |
|
|
| KEM-3
| Universal
Eave Mount - For J Pipe Mounts and Mast installations |
|
Professional Heavy Duty Eave Mount Bracket is designed
to lag bolt to the fascia of the eave. Installers can
mount the bracket across the gable of the roof, or at
any other angle of the Eave Fascia. The outer plate
pivots to place J Pipe mount or mast vertical. Lag bolts
are suggested to secure bracket to fascia. (Lag bolts
not included) This Eave Mount bracket mounts in minutes,
installers save time by not having to mount on the roof.
No holes drilled in the roof.
MSRP $29.95
-
Link
to Brochure
|
 |
|
|
|
EM-4 | Universal Eave
Mount - For J Pipe Mounts and Mast Installations |
|
Universal
Eave Mount Bracket is designed to lag bolt to the fascia
of the eave. Installers can mount the bracket across the
gable of the roof, or at any other angle of the Eave
Fascia. The outer plate pivots to place J Pipe mount or
mast vertical. Lag bolts are suggested to secure bracket
to fascia. (Lag bolts not included) This Eave Mount
bracket mounts in minutes, installers save time by not
having to mount on the roof. No holes drilled in the
roof. The EM-4 is the most versatile bracket of it’s
kind. The EM-4 can be mounted 4 different ways.
MSRP
$29.95 -
Link
to Brochure
|
 |
|
|
|
|
EM-5 | Recessed Eave Mount
- For J Pipe Mounts and Mast installations
|
|
Eave Mount
Bracket is designed to lag bolt to the fascia of
recessed eaves. Installers can mount the bracket at an
angle up to 40 degrees, perfect for tile roofs. The
Outer plate pivots to place J Pipe mount or mast
vertical. Lag bolts are suggested to secure bracket to
fascia. (Lag bolts not included) This Eave Mount bracket
mounts in minutes, And is compatible with all of our EM
series. The EM-5 can be mounted many different ways.
(See Photos) The EM-5 mounts with no holes drilled in
roof.
MSRP
$34.95 -
Link
to Brochure
|
 |
|
|
|
|
EM-6 |
Under Eaves Mount Bracket
|
|
Professional Heavy Duty Eaves Mount Bracket is designed
to lag bolt to the under side of the Eaves. Installers
can mount the bracket on the pitch or the horizontal of
the eaves. Mount a J-pipe or any of our EM Series
mounts. By mounting under the eaves you can get Six Lag
Bolts into 2 X 4 in the eaves over hangs. This makes for
a rock solid mounting surface. Get around Gutters, Tile
Roofs, or any obstruction. No drilling into Siding or
roofs.
MSRP
$34.95 -
Link
to Brochure
|
 |
|
|
|
|
EM-7 | Em-7 NEW! Allows
Installation of 2” J-pipes |
|
The EM-7
Heavy Duty Eaves Mount Bracket is designed to lag bolt
to the under side of the Eaves. By mounting under the
eaves you can get Six Lag Bolts into 2 X 4 in the eaves’
over hangs. This larger version of the EM-6 allows for
installation of the 2” J-pipes commonly used on
DirecTV’s High Definition 5LNB dish. The EM-7 makes for
a rock solid mounting surface getting around gutters,
tile roofs, or any other obstructions. No more drilling
into Siding or roofs!
MSRP: $ 59.95 -
Link
to Brochure
|
 |
|
|
|
| |
|
Non-Penetrating
Roof Mounts |
| NPR-A-2
| Non-Penetrating Roof Mount |
|
This new
heavy duty non-penetrating Roof Mount fits two dish
sizes (1 5/8” & 2”) all in one box. This unit comes
unassembled. The NPR-A-2 mounts Dish 300, 500, 1000,
Direct TV, Super Dish, WildBlue, Direct TV new Slim Line
H.D. 5 LNB Dish, & 2 3/8” Dish antennas, NPRMAT2 and 8
concrete blocks are required for installation. (NOT
INCLUDED) NPRMAT2 can be purchased separately. See
catalog. Shipping weight: 25 lbs. each.
MSRP $72.95 -
Link
to Brochure
|
 |
|
|
|
|
NPR-A-3 |
Non-Penetrating Roof Mount |
|
This new
heavy duty non-penetrating Roof Mount fits three dish
sizes (1 5/8”, 2”, 2 3/8”) all in one box. This unit
comes unassembled. The NPR-A-3 mounts Dish 300, 500,
1000, Direct TV, Super Dish, WildBlue, Direct TV new
Slim Line H.D. 5 LNB Dish, 2 3/8” Dish antennas,
Starband, & Hughes Net. NPRMAT2 and 8 concrete blocks
are required for installation. (NOT INCLUDED) NPRMAT2
can be purchased separately. See catalog. Shipping
weight: 26 lbs. each.
MSRP $99.95 -
Link
to Brochure |
 |
|
|
|
| NPR-DDM
| Universal Non-Penetrating Roof Mount (For
DiREC WAY, Star Band, Direct T V, & Dish Network) |
|
Heavy
Duty Non-penetrating Roof Mount allows you to install
dish antennas in Minutes. Use on flat roofs where no holes can
be drilled. 24" X 39" welded frame, powder
coated. Can
mount 2 dish antennas on this mount. Fits DiREC
WAY, Starband, Direct TV, & Dish Network. NPRMAT1 @
$10.50
MSRP
$39.95 -
Link
to Brochure
|
 |
|
|
|
|
NPR-PEK |
NEW! Non-Penetrating Peak Mount |
|
This new
non-penetrating roof mount is a heavy gauge steel
solution for angled roof peak installation. NPR-PEK is a
universal roof mount and is an easy way to mount a dish
on an angled roof peak. Using Ballast Blocks and iron
angles dishes are safely mounted without penetrating the
roof surface. The DTK or Double Tray Kit addition allows
for installation of the Starband and Hughes Net dishes
offering extra support with a second layer of ballast
blocks. It’s ideal for steal or metal roof surfaces
where no holes may be drilled.
MSRP
$139.95 -
Link
to Brochure |
 |
|
|
NPR-WB |
Wild Blue Approved Non Penetrating Roof Mount |
|
This is the
new WILD BLUE approved heavy duty Non-penetrating Roof
Mount. This unit comes assembled as a welded frame with
slotted tabs to bolt support arms. Installation hardware
is included. The NPR-WB is powder-coated Gibraltar gray
to match WILD BLUE satellite equipment. The NPR-WB will
also mount Direct TV, Direct TV Slim Line, Dish, Dish
Network 300, 500, & 1000. Uses a NPRMAT1 Rubber mat and
6 concrete blocks for installation. (NOT INCLUDED)
NPRMAT1 can be purchased separately. See catalog.
Shipping weight: 15 lbs. each.
MSRP
$74.95 -
Link
to Brochure |
 |
|
| NPR-18A
|Universal Non-Penetrating Roof Mount (For light weight Beam & Panel Antennas) |
|
This improved non penetrating roof or patio mount installs small dish antennas,panel's antennas , light weight point to point links ,cameras .Use on flat roof where on holes can be drilled . One piece welded frame powder coated for long lasting finish 1 5/8 " OD mast 34 " tall . base 16 1/2 X 18 1/2 " square . Now has two support arms for extra strength . Use for dish 300.500,1000.& direcTV 18 " dish. Great for R Vs ( 2 to 4 concrete blocks required ) shipping weight 13 lbs.
MSRP
$39.95 -
Link
to Brochure
|
 |
|
|
|
|
NPR-238-278 | Universal Non-Penetrating Roof Mount
|
|
Heavy Duty Non-penetrating Roof Mount allows you to install dish antennas in 30 to 45 Minutes. Use on flat roofs where no holes can be drilled. Comes broken down in a 5” X 6” X 53” Box for easy UPS shipping. Weight 75 pounds. Heavy steel with powder coated gray paint, for a long lasting finish. Assembly bolts are included. 2 3/8 inches & 2 7/8 inch diameter mast 36 inches tall. Base is 51” X 51” square. Comes with a 52 inch X 52 inch rubber mat. Designed to hold .7 meter to 1.2 meter Dish Antennas
MSRP $150.00 - Link to
Brochure
|
 |
|
|
|
|
NPR-60-158 |
Universal
non-penetrating extra tall roof mount |
|
This new
non-penetrating roof mount is extra tall and has two 60”
masts. The mast can be connected together for extra
height up to 10 feet or cut to any length. The mast has
two sizes, flip over 1 ½” and 1 5/8”. Uses include
Direct TV all 1 5/8”, Dish Network 300, 500, 1000, 1
5/8”, panel antennas, point to point small antennas, &
weather stations. Base is 35”x35”, mast height 60”. Add
extension to 120” (included). Powder coated gray. Comes
unassembled in 5x5x60” box. Shipping weight is 36 lbs.
(eight concrete blocks required, but not included). Uses
NPRMAT2 rubber mat which is included.
MSRP $109.95 - Link to
Brochure
|
 |
|
|
|
|
|
|
|
Stiffing
Kits |
|
SK-278 |
|
|
Recommended
Stiffing kit for NPR-238-278. • UPS Able
(Shipping weight 5 lbs.)
MSRP $19.95 |
 |
|
|
|
|
Tether
Kits |
|
This new
safety item tethers dish to non-penetrating roof mount
or building. 50 foot length. Red plastic galvanized
steel cable. 1700 lbs. test. 4 cable clamps included.
(Shipping weight 2 lbs.)
MSRP $45.00 |
 |
|
|
|
|
Support
Struts |
|
SS-1 |
Support Struts |
|
|
Will fit 2”
and 2-3/8” pipes. When extra support is required. Ideal
for use on J-pipes. (Not included.) (Shipping weight 5
lbs.)
MSRP $19.95 |
 |
|
|
|
|
Rubber
Mats |
|
NPRMAT 1 |
Designed for under
non-penetrating roof mounts. UV resistant. 1/8” thick
rubber. Protects roof and roof membrain. Non skid
texture. NPRMAT 1 (24 - 1/2” x 39”). Shipping weight 5
lbs. Case quantity 9 (46 lbs.)
MSRP $19.95 |
|
|
|
|
|
NPRMAT 2 |
Designed for under
non-penetrating roof mounts. UV resistant. 1/8” thick
rubber. Protects roof and roof membrain. Non skid
texture. NPRMAT 2 (36” x 36”) Shipping weight 6 lbs.
Case quantity 9 (54 lbs.)
MSRP $19.95 |
|
|
|
|
|
|
|
|
|
|
|
Tower
Mounts
|
|
TM-1 |
Universal Tower Mount
|
|
Heavy Duty Tower Mount Bracket is designed to U-bolt to Rohn 20 or 25 tower. We have left mast selection up to the dealer, 1” to 2 mast can be used with the TM-1. Mast is not included in the TM-1 package. Mast Kits are available.
MSRP $59.95 - Link to
Brochure
|
 |
|
|
|
|
Mast
Kits
|
|
TMM-1 |
|
1 5/8"
MSRP $19.95 |
 |
|
|
|
|
TMM-2 |
2"
MSRP $24.95 |
 |
|
|
|
|
|
Quick
Pipe Adaptors |
|
QPA-1-158 is 1 5/8" | Quick Pipe Adaptor
for Direct & Dish Network |
|
This
Professional Heavy Duty Quick Pipe Adapter was invented
in 1998 by Mike Roncke of A I Satellite Distributors. It
allows you to install dish antennas in Minutes. Use it
on any surface up to ½ inch in thickness. Roof vent
pipe, sewer stacks, Angle iron, solid rods ¾ inch to 1
1/4 inch around, and flat surfaces up to ½ inch thick.
Save Time and Money by reusing existing surfaces with
the QPA-1-158 Quick Pipe Adapters.
MSRP
$9.95 -
Link
to Brochure
|
 |
|
|
|
|
QPA-2-200 is 2" | Quick Pipe
Adaptor for Super Dish/Direct TV/New HD Dish |
|
This
Professional Heavy Duty Quick Pipe Adapter, invented by
Mike Roncke of A I Satellite Distributors, allows you to
install dish antennas in minutes. Use on any surface up
to 3/8 inch in thickness. Installs on C band pipe 2 3/8”
to 5’ in diameter, roof vent pipe, sewer stacks, angle
iron, and flat surfaces up to 3/8 inch thick. Save time
and money by reusing existing pipes and surfaces with
the QPA-2-200 Quick Pipe Adapters
MSRP
$19.95 -
Link
to Brochure
|
 |
|
|
|
|
QPA-2-200WB is 2"| Quick Pipe
Adaptor for Super Dish, Wild Blue & more |
|
This
WildBlue approved Professional Heavy Duty Quick Pipe
Adapter was invented by Mike Roncke of A I Satellite and
can be used on any surface up to 3/8 inch in thickness.
Install on 2 3/8” ground poles and C band pipe 3” to 5”
in diameter, angle iron, and flat surfaces up to 3/8
inch thick. Save Time and Money by reusing existing
pipes with the QPA-2-200WB Quick Pipe Adapters. Powder
coated in matching Gibraltar gray. Hardware includes
grade 5 bolt and lock nut set (2).
MSRP
$19.95 -
Link
to Brochure
|
 |
| |